View Single Post
Old Jan 08, 2011, 11:36 AM
Nelapaty is online now
Find More Posts by Nelapaty
KK4NZS
Nelapaty's Avatar
Virginia
Joined Sep 2006
1,522 Posts
Here's mine That I purchased off ebay. This one is a different model no (HP/Compaq Proliant DL380 G4 575w Power Supply, 406393-001) than the one tjinguy talks about here on this page.
https://sites.google.com/site/tjingu...-how-tos/HP47A
but it's not the same pin configuration to turn it on. I did notice some voltage differences 1 to 2volts increase when I changed the pin configuration but it performs better with the one here from xandrios
http://www.rcgroups.com/forums/showp...&postcount=586

These units are quieter than the HP dps 600p bb that are mentioned in the above web-link (tjinguy) and fan sits lower to the blades as to the other model where they sit higher. They get warm but not hot as they have a huge heat sink towards the end of the power plug.

these can handle loads upto 50amps But warning input and out wires get very warm

This should be enough for PL8 AND Cellpro 10 at normal 2c charge rates
Nelapaty is online now Find More Posts by Nelapaty
Last edited by Nelapaty; Apr 18, 2012 at 09:24 AM.
Reply With Quote