View Single Post
Old Jan 06, 2011, 04:05 PM
KeithLuneau is offline
Find More Posts by KeithLuneau
define("BEASTMODE", "1");
KeithLuneau's Avatar
United States, LA, Moreauville
Joined Jan 2002
4,394 Posts
I did miss that post!

Yeah I did shoot video with it before opening it up, and it seemed the focal point was about 5 or 6 feet away. I opened it up and screwed the lens in about 1/8th turn, then tried again, and it was blurry. It shot great macro video though... lol So then I took one half off the case and went outside, and let it start recording, then screwed the lens back out to where it was stock, then 1/8th out, and finally 1/4 turn out. Then I came back in and watched the video. It seems that right around 1/8 turn out from stock is best, at least with mine! One thing I did notice is that the lens stick out a lot more, much more area to grab on to turn it than the #3 and #8 cameras. It was also not glued in like they were, it just turns freely, with just enough friction to stop it from moving on it's own. The whole sensor is glued into the plastic case much better too.

I can post some picture of it with the case open if anyone wants to see it!
KeithLuneau is offline Find More Posts by KeithLuneau