I build Depron and EEP planes with UHU Por. The ability to pull apart pieces before it sets is a great aid for me. Also it never turns the Depron or EEP brittle. This helps a lot when you canopy land
I built this kit up using a TURNIGY 2204-14T 19g Outrunner and Turnigy 6amp esc.Two HXT 500 servo's for the tail and a HXT900 for the aileron and you have a great indoor plane. Flies very light.
Had a Pluma and it flies heavier. Build this kit as light as you can for really low and slow flying.