Hitec RCD Connector Types & Extension Leads inc Telemetry
Originally Posted by bradp015
hi alan! wondered if hitec has a "list" of connector types it uses in the A9, op rx's, telem system, etc.
.. sure would be nice to know what they are, not having a lot of experience with the diff. types.
or maybe just send me to the info elsewhere would be great too!
i usually make up my own extensions length specific to my install.
. Hitec Parts & Accessories
. Hitec Transceivers/Receiver Port and Servo Leads - Polarity
Telemetry Extension Leads.
. Optical Sensor, with DIY extension, attached Heli tail pictures x 3
. At the present time, there are no extension leads for the telemetry units.
.."The stock length of the RPM leads are supposed to be longer on the next batch
but extensions are needed in many cases although this should help.
Temp leads can become inaccurate (I've been told) if they get much longer but I don't know to what extent.
There is an extension offered here that would work with the RPM sensors for now.- Mike"...
. Horizon often block direct link, search Horizon for SPMA2001 = 6" & SPMA9551= 12" Ultra Micro Extensions.
. SPMA2001 - pictured Spektrum site
Maximum separation between sensor & HTS-SS reported is 24"<30"
Alan's Hobby, Model & RC FAQ Web Links