View Single Post
Old Dec 31, 2010, 06:32 PM
lostheli is online now
Find More Posts by lostheli
Registered Abuser
lostheli's Avatar
Joined Nov 2010
573 Posts
finster, I have added to your instructions. It took me three times to get it to work. I think this will help.

Remove Date/Time Instructions:

Use at own risk!!! Follow steps below.

#1 Turn on camera, plug in USB.

#2 Open the camera folder and place the FW96630A NO TIME.bin file next to the DCIM folder (root of camera)
Important Note: ((Do not rename or modify the .bin files))

#3 Unplug the USB and wait for the light to go off on its own.

#4 Turn on camera and wait for the light to appear (takes few seconds)

#5 Plug in USB

#6 Open the camera folder again but this time delete the file FW96630A.bin from the folder. Make sure to delete the file or the cam will keep installing the .bin file each time the cam powers up.

#7 Unplug the USB and wait for the light to go off on its own.

#8 Test your cam to see if Time/Date is gone.


First attempt
At #5 I removed the SD card and used the adapter to remove the .bin file. Returned SD card to cam and this did not work.
Second attempt
At #7 I unplugged the usb and immediately began pushing the button to record video. This did not work.

So #5 to help those who over think things, and #7 for those who are impatient.
lostheli is online now Find More Posts by lostheli