Thread: New Product exceed mad torq 1/10 moa crawler
View Single Post
Old Dec 26, 2010, 09:01 AM
rcphreak is offline
Find More Posts by rcphreak
in memory of dez RIP
rcphreak's Avatar
USA, FL, Fort Myers
Joined Jun 2008
2,495 Posts
scale looks to be the same it has similar links but the main chassis is different . wheels -tires, body .are different this one is built more like the max stone 8 just smaller . it looks to have a lower cog and is set up better and you can get it in blue ,green and orange . ive never owned a mad crawler but from pics looks to be the same drive train .

here are the specs : mad crawler

•Length: 485mm (19.09 inch)
•Width: 330mm (12.99 inch)
•Height: 370mm (14.57 inch)
•Wheelbase: 300mm (11.81 inch)
•Engine: Dual 540 motor
•Battery: 7.2V 3000mAH Ni-MH

Package Include:
•Mad Crawler (100% assembled)
•7.2V 3000mAh Ni-MH Rechargeable Battery
•Wall Battery Charger
•Pistol Grip Radio Remote Controller with Antenna
•Instruction Manual

mad torq :

Full ball bearing throughout whole vehicle
Multi-link suspension allows for smooth crawling
Four wheel driving provides tremendous grip for wheels
"Truck/Hammer/Wecker" style body
Alloy lower suspension link bars with captured ends
Solid axle mount provides protection for front/rear shaft
High precision ESC w/ reverse function
High precision 2 channel receiver

Designed from the get-go as a rock crawling machine that goes anywhere.
Super long nitride coated shocks offer a wider range of articulation.
The 2.4Ghz RTR Exceed RC Mad Torque transmission was designed to place the weight of the motor as low as possible to maintain a low CG (Center of Gravity).
The 2.4Ghz RTR Exceed RC Mad Torque chassis is lightweight and stiff.
Advanced battery mounting design.
Axle -Mounted steering servo.
Dual High-torque 540 motors.
Advanced tire pattern provides best grip and balance.
High performance electronic speed controller.
Advanced monster stocks design provides the best support.
Unique Aluminum Alloy twin vertical plate chassis design
Revolutionary multi-link crawler suspension design
Heavy duty special harden metal ring and pinion gears, axles and axle shafts
Advanced aluminum alloy suspension links
Advanced locked differentials four wheel drive design
High performance motor design
High performance heavy duty rock crawling servo
High performance racing level 7.2v 3000mah ni-mh battery.

Motor 540 Motor
Bearing Ball Bearing
Length 22.83 inches (580mm)
Width 13.94 inches (354mm)
Height 9.25 inches (235mm)
Wheelbase 16.54 inches (420mm)
Weight 2970g
Batteries Ni-MH 7.2V 3000mAh
ESC Electric Speed Control
Radio 2.4Ghz Pistol Remote Control
Receiver 2.4Ghz 4CH FHSS Receiver
rcphreak is offline Find More Posts by rcphreak
Reply With Quote