View Single Post
Old Dec 24, 2010, 10:08 PM
A.T. is offline
Find More Posts by A.T.
Registered User
Joined Aug 2002
5,811 Posts
Quote:
Originally Posted by DuBatic View Post
I'm trying to use the telemetry in a 33% airplane but I'm having some problems.Because all the wires from the sensors are too short I had to install the sensor station at the motor box. The problem is that the distance from the sensor station to the receiver is more than 40in and the data signal does not reach the receiver.Is there any solution for this? Tks Dubatic
Quote:
Originally Posted by DIG2fly View Post
I second that! Hitec please make some extention cables? IG
Hitec RCD AFHSS Telemetry - Instruction Sheets & User Guide with pictures.
"6. Optical Sensor, with DIY extension, attached Heli tail pictures x 3"
""Agreed. The stock length of the RPM leads are supposed to be longer on the next batch but extensions are needed in many cases although this should help. Temp leads can become inaccurate (I've been told) if they get much longer but I don't know to what extent. There is an extension offered here that would work with the RPM sensors for now: http://www.horizonhobby.com/Products...rodID=SPMA2001
Thanks for the input. - Mike.""


In case Horizon as usual blocks direct link = SPMA2001 6-inch Ultra Micro Extension


Aurora A9, Spectra Pro & Optima - FAQ & Undocumented Features - Mixes, Setups, Tips. {Individual Links often updated}

Alan T.
Alan's Hobby, Model & RC FAQ Web Links
A.T. is offline Find More Posts by A.T.
Reply With Quote