View Single Post
Old Jan 07, 2004, 07:01 PM
Littlescreamers is offline
Find More Posts by Littlescreamers
Registered User
Edmonds Wa. (Seattle)
Joined Nov 2003
3,937 Posts
Well I did some testing and this is what I get
Motor is wound with 22 wraps of 26gauge wire stock grey ring magnet and test was done with a 2s1p E-Tech 1200s

This is a Brushless full bearing Custom Cd-conversion motor:
fully tested and ran at 1/3throttle 1A ,9W, 7.1volts. for 53min, No stutters or hesitations, Clean throttle responce throughout complete range and No detectable heat at all! NONE!
WOT test with a zagi prop 5 1/4 x ?
Total weight: 24 grams
1st Test:

Thrust= 7.3oz WOT
amps=9 WOT
volts=8.4 WOT

2nd Test with 6030 prop

Thrust=10.1oz WOT
amps= 5.5 WOT
volts= 6.7 WOT
This is the prop for this motor!

Still waiting for my new Tach to show up.

Thanks
Little Screemers!
Scott
&
matt
rcflyer2
Littlescreamers is offline Find More Posts by Littlescreamers
Last edited by Littlescreamers; Jan 07, 2004 at 08:19 PM.
Reply With Quote