Thread: Discussion Dynam SR Trainer ARF
View Single Post
Old Dec 18, 2010, 08:42 AM
dbc is offline
Find More Posts by dbc
Registered User
United States, FL, Brooksville
Joined Apr 2008
2,372 Posts
I was just joking about the price. All of these are very inexpensive.

I'm pretty sure that the prop saver can be removed from the Dynam motor leaving a shaft the same length as the SR's. Spec's on the motors are identical.

The motor you linked would not work well for this application. Notice it's KV rating of 740?
It will not spin the prop fast enough to provide adequate power. This motor would require a larger prop or higher V battery, neither of which can be used in this plane. You need a rating near the 1050 of the stock motor.

This one would be appropriate:

No reason to change the ESC. But because the motor does not have a threaded shaft you would have to use a prop adapter.

Here's another good candidate from a reputable supplier, adapter included:
dbc is offline Find More Posts by dbc
Last edited by dbc; Dec 18, 2010 at 11:16 AM.
Reply With Quote