View Single Post
Old Dec 15, 2010, 02:08 AM
SON OF PALEFACE is offline
Find More Posts by SON OF PALEFACE
Ozzie Express wiggy pilot
SON OF PALEFACE's Avatar
YANKALILLA , SOUTH AUSTRALIA.
Joined Nov 2002
5,234 Posts
Gday blokes , just putting mine 2gether , got it from the Aussie warehouse , fast service...
I took the motor out and put in one of these... pretty easy just had to re-drill the three mounting bolt holes , oh and file down the front boss a little to fit into the spinner back plate
http://www.hobbycity.com/hobbycity/s...idProduct=6549
Now with the original prop it pulls a tad over 10amps on 3s...plenty of thrust for this jigger
Also had epoxy back in one of the wing blind nut-plates that was full of rubber glue
and will glue in a maggot instead of the lame metal at the rear canopy latch
Should have it going 2morry arfty

cheers
Ian


PS....................wheres the best CG postition..............and dont say "on the wing"
SON OF PALEFACE is offline Find More Posts by SON OF PALEFACE
Last edited by SON OF PALEFACE; Dec 15, 2010 at 02:19 AM.
Reply With Quote