View Single Post
Old Dec 09, 2010, 05:22 PM
Slaanesh is offline
Find More Posts by Slaanesh
Not enough hours in the day
Slaanesh's Avatar
Melbourne
Joined Feb 2009
2,460 Posts
412mm puts the CG right at the mold line on the wing.
I went 1mm in front of that. I balance my model with the tips of my fingers and make sure that it balances flat at that point. If it leans forward or back, your CoG isn't correct.

That first mold line is about 20mm or so in and runs down the wing. See the attached photo.
Slaanesh is offline Find More Posts by Slaanesh
Reply With Quote