Thread: Discussion ESC Response Testing
View Single Post
Old Nov 30, 2010, 04:48 PM
obor is offline
Find More Posts by obor
Registered User
France
Joined Nov 2003
287 Posts
TPmag8 response time in fast PPM

First results of my measurements with towerpro in two version: standard, and reflashed for fast PPM at 400Hz.

Rate is the duration while same throttle duty is kept (100 or 300 msec).

The duty (pulse length) vary between { 1200, 1600, 1200, 1800, 1200, 1700 } usec.

The throttle duty is shown, at the same time than the RPM. So you can see how much time it takes for a throttle duty to become true RPM.

As you can see, there is not that much difference. However, the reflashed version looks more accurate at rate 100msec than the non-reflashed one.


Edit: Please note that in the graph below, RPM number are wrong, and they must be divided by 6 to get the real value. I added magnet to the RPM tool without dividing the final result. Sorry.
obor is offline Find More Posts by obor
Last edited by obor; Dec 01, 2010 at 05:12 PM. Reason: Error in graph
Reply With Quote