Thread: Discussion Walkera 4F200 3 blade head
View Single Post
Old Nov 28, 2010, 05:30 PM
Alwayscrash is offline
Find More Posts by Alwayscrash
"you'll play to live "
Alwayscrash's Avatar
Canada, QC, Montreal
Joined Sep 2009
1,820 Posts
Quote:
Originally Posted by martin_ View Post
Did you know why you hit the wall on lift-off? I just finished to install those DS470 servo today and I had to reverse the servo rotation in the TX, then after the set-up completed, I go to a test fly outside, I lift-off, hover for 4 - 5 second (not too high to feel the new servo reaction) then the heli suddenly bank left for no reason and crashed......

After a long inspection and some test I found the problem, the servo input is well reversed in the TX and all work very fine exept that the axis gyro in the receiver are not reversed and still make their correction in the wrong direction.

Is there a way to reverse the axis gyro movement, or I will have to change the motor polarity in both servo?
Have you try to diminish balance pot near minimum? ele & ail near center? eems that digital servos are too fast for RX to control.
AC
Alwayscrash is offline Find More Posts by Alwayscrash
Reply With Quote