View Single Post
Old Nov 22, 2010, 12:02 PM
Boneswamped is offline
Find More Posts by Boneswamped
RC Group therapist
Boneswamped's Avatar
DeRidder LA.
Joined Nov 2008
1,961 Posts
Ok guys, you're making this hub thing more complicated than it is. Here is the simple answer:

When you look at your hub from the top, and turn the hub counter-clockwise; the blade grips should appear to sweep forward toward the direction of rotation. If they are sweeping aft of the rotation(as in the picture of the replacement hub above) they are installed wrong.

This is a delta offset style hub and an incorrect sweep angle will prevent the model from flying.

Take another look at the picture in post #74, or #134 and pay attention to the difference in the angle of the blade grips(the white plastic part with the angle on the end). Remove your grips, flip them over, and re-install. Done deal guys.

Hope this helps,
-Mike
Boneswamped is offline Find More Posts by Boneswamped
Reply With Quote