View Single Post
Old Nov 09, 2010, 12:55 AM
(Jo)Hannes is offline
Find More Posts by (Jo)Hannes
der Frickler
(Jo)Hannes's Avatar
Trier, Germany
Joined Aug 2007
672 Posts
Quote:
Originally Posted by noppita View Post
I am looking at your pictures and look different than i describe. On left hand side of the regulator, you connect the top pad to the bottom pad and leaving middle pad untouch right? and right hand side of the regulator is un touch right?
Mmmmh thats what i understood from your description:

Quote:
Originally Posted by noppita View Post
if you are willing to try, look at U5, it is a regulator. there are 3 pad on one side and 2 pad on the other side. If you put a jumper wire from the 3 pad side at first pad to the third pad and now on the 2 pad side, you will read 3 v, then look for your signal connection for roll , yaw and pitch again, now it should work. but i do not sure, you will have to try at your risk.
What did you really mean?


greets and thanks

Johannes
(Jo)Hannes is offline Find More Posts by (Jo)Hannes
Reply With Quote