View Single Post
Old Oct 11, 2010, 04:05 PM
Arcteryxxx is offline
Find More Posts by Arcteryxxx
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Norway, Telemark, Skien
Joined Feb 2010
4,556 Posts
Wing tip spoilers - Hoerner wing

Here's a modification I did to the Sleipner:

I shaved (sanded) off the bottom of the last 1/2 inch making an angle of about 45 degrees or so upward (Mopar: this is LAR - no doubt). The reason for this is simple and you can read about it here: (scroll down to the "Wing Tip"-section) http://www.zenithair.com/stolch801/design/design.html
and here: http://www.aircraftspruce.com/catalo...CHEwingtip.php

It might be even better if I had angled the wing tip all the way through and I might try that later. It would be really cool if someone with a glassed Stryker could do this conversion and tell me if there was any difference before and after
Arcteryxxx is offline Find More Posts by Arcteryxxx
Last edited by Arcteryxxx; Oct 12, 2010 at 02:45 AM.
Reply With Quote