View Single Post
Old Oct 05, 2010, 06:35 PM
cray2602 is offline
Find More Posts by cray2602
cray2602's Avatar
Plain ole KS
Joined Jan 2008
1,658 Posts
I modded mine with a rudder. Its a simple mod to do while building, theres plenty of room to run a wire right along with the ESC channeling. Without rudder for landing in cross winds i think my J-10 would be dead by now. One other thing i did was to add a piece of carbon fibre to the wing tips, with the rear wheels at stock location this model tips over very easy and chews the wing tips off. I moved my rear wheels farther out to the side and a tad bit farther aft, that pretty much stopped the tip overs. If you fly off of debri filled runways its a good idea to use a wire mesh to cover the cheater hole. I blew two fans up from the nose wheel kicking up a piece of gravel. And magnets at the rear of the hatch works well in combination with the plastic snap in front.
cray2602 is offline Find More Posts by cray2602
Last edited by cray2602; Oct 05, 2010 at 06:43 PM.
Reply With Quote