View Single Post
Old Aug 31, 2010, 10:21 PM
deanc338 is offline
Find More Posts by deanc338
Shut up and talk to me!!
Manila
Joined Aug 2006
286 Posts
Built the 18" F22 and flown last Saturday. And what a blast!!!!

This my first profile plane and first profile jet and had sooooo much fun!!! Thanks for the plans.

AUW is about 180g made with 5mm depron based on the 20x30 FB design, what AUW do you guys get on your planes?

specs are as follows:

Turnigy 1811-3800
GWS 4025 prop
10A generic ESC
Turnigy 800mAh 2S Lipo
Turnigy 4.7g servo
HK TR6A RX

I'm not sure if I can use a larger prop or larger pitched one without frying the motor, although with the current setup the motor is just warm to touch and screams like there is no tomorrow. Let me know what you think guys.

We'll post pics later....
deanc338 is offline Find More Posts by deanc338
Reply With Quote