Thread: New Product Electrifly Cirrus SR22 Turbo ARF
View Single Post
Old Jul 16, 2010, 01:56 PM
nioa is offline
Find More Posts by nioa
More Motors, More Fun... :-)
nioa's Avatar
Phoenix, AZ
Joined Jan 2008
741 Posts
Quote:
Originally Posted by Fredriksson View Post
.....I am looking forward to nioa's report on how the Turnigy motor mounting matches up to the 19mm pattern on the Cirrus. I am thinking of going with the Turnigy 35-36B 1300kv motor with a 10x6 prop. Freddy
I just received the Turnigy 35-36B 1300kv and Turnigy AerodriveXp SK Series 35-30 1400Kv Motors. These are the closest to the Rimfire I can find at HobbyKing. They weigh in at 106g and 90g respectively. The GP 35-30-1250 weighs 71g. It has been my experience that the Turnigy motors seem to always be slightly less Kv then stated.

The Rimfire 10 motor has a symmetrical 19 mm mount, center-to-center. 4 mm diameter shaft. The shaft length is 17mm.

The 35 series Turnigy motors have a 19 mm center-to-center mount and a 25mm center-to-center mount (see the attached image). 4 mm diameter shaft. The shaft on both motors is about 17.5 mm long.


Next up, I will do power testing of the motors, hopefully tonight or Saturday.
nioa is offline Find More Posts by nioa
Last edited by nioa; Jul 16, 2010 at 03:56 PM.
Reply With Quote