Thread: Build Log EPP Foam Sloroller 3D Biplane
View Single Post
Old Jun 19, 2010, 10:36 AM
tallflyer is offline
Find More Posts by tallflyer
Registered User
tallflyer's Avatar
United States, CA, San Diego
Joined Jul 2002
6,441 Posts
Quote:
Originally Posted by Thanos View Post
I just finished my Sloroller but it came up 285gr (10oz). It's all 6mm depron and my setup: HXM2730-1300 motor (http://www.hobbyking.com/hobbyking/s...idProduct=2069), 12A esc, 500mAh 3s lipo, two 5gr and one 9gr servos. I tried 8x3.8 and 9x6 props but no luck! Motor gets really hot (80 C) and it hovers at almost full throttle. Any suggestions for another motor at 12A?
Thanks
Thanos


You might need to use a Motor like this one

Turnigy C35 From Hobby City
tallflyer is offline Find More Posts by tallflyer
RCG Plus Member
Latest blog entry: New GoPro Hero3+ Black Edition
Reply With Quote