Aerial Photography request an Autopilot system & Ground Control Station
View Single Post
Jun 02, 2010
, 10:31 PM
Joined Feb 2010
Fligt Path setting
What you mentioned is about the flight path( waypoints setting) for you Airplane, is that right? just as illustrated below.
I'm not very clear about the " autopilot RTL" , but for the GCS, it has noting to do with the so called 200*800M rectangular, because the flight path is not limited to the rectangular ,just set it as you wish ,the distance between each points is depends on you demands and you airplane. so the ground control station has not restricts on it.
Last edited by Atflying; Jun 03, 2010 at
. Reason: picture replace