View Single Post
Old May 08, 2010, 02:11 AM
jimmanyk is offline
Find More Posts by jimmanyk
Registered User
Joined Oct 2006
2 Posts
my problem was the socket was "deep" in the tx so the plug bottomed out on the case. After removing the back and pluging in my cable it worked. I desoldered the socket got a small piece of strip board drilled 6 holes larger to go over legs of the socket, removed the copper tracks of the strip board refitted the socket with strip board packer the legs have just enough length to solder. works ok now. I noticed that on my 8fg that the socket is nearer the surface of its case hence the 7c mod.
I suppose it could be easier to file some plastic of the sim plug but the thickness of strip board is thicker than the wall of the plug.
jimmanyk is offline Find More Posts by jimmanyk
Reply With Quote