Sky Surfer - aka Bixler See Post #2 & #3 for parts & mods B4 asking
View Single Post
Apr 28, 2010
, 10:51 PM
USA, IL, Lake Forest
Joined May 2007
Now onto the instalation of the universal motor mount.
View all Images in thread
I felt the OD of the adapter would require to much foam removal from the nacelle.
So i removed about 3/4 of the OD of the adapter with my hi tech milling machine. (dremel with sanding drum in the dremel drill press) I did not turn down the flange end of the adapter as you need this to be as thick as possible.
after turning down the pvc adapter, I trimmed out the foam inside the nacelle.
Test fitting the pvc adapter
final test fit looks pretty good.