View Single Post
Old Apr 26, 2010, 03:18 PM
Erec10 is offline
Find More Posts by Erec10
If you fall 5 times, get up 6!
Santarem - Portugal
Joined Dec 2007
49 Posts
Well i was going crazy because of this so try other way: i copy all the .pde files plus the .h files and past on the Arduino Library then i open it and like magic they were all there. this was donne befor i read you post so for now its working, i will try the gps lock with the transmitter on because i still havenīt got the servo driver. Another question: after we made the change on the Arduino:
"Click the tab labelled "ap_2_6_header.h" and change line #define GPS_PROTOCOL 2 to #define GPS_PROTOCOL 0. This will enable the NMEA protocol. NOTE: Be SURE to hit the SAVE button after editing anything on a tab!!!"
- donīt we have to upload this new information to the Ardupilot? so that the AP receive the info from the OSD GPS.
Erec10 is offline Find More Posts by Erec10
Last edited by Erec10; Apr 26, 2010 at 06:32 PM.
Reply With Quote