View Single Post
Old Apr 02, 2010, 04:25 PM
JaggedEdge is offline
Find More Posts by JaggedEdge
Buildin'em and flyin'em
JaggedEdge's Avatar
United States, NY, Erie
Joined Dec 2007
448 Posts
Couple pics of my progress. Should have this one ready tonight.
All the pieces are cut and cf rods glued in place. Since my sheets weren't long enough I decided to add wingtips rather than adding the fuse. glued using 5 minute epoxy. I extended the rod for the wings to help secure the wing tips.

Beveled the ail/elev edges with sandpaper.

Will be running a GWS EP8040 prop with a hextronik 1300kv motor on 25c 3s 850mah pack.

Brushless Outrunner Motor - hexTronik 24gram 1300kv
Kv - 1300rpm/v
Max Load: 7.5A
No Load Current: 0.7A
Suggested Lipo: 3 cell 11.1v
Thrust: 400g+
Suggested Prop: 8x3.8
Weight: 20g
JaggedEdge is offline Find More Posts by JaggedEdge
Reply With Quote