View Single Post
Old Feb 15, 2010, 02:44 PM
modfly is offline
Find More Posts by modfly
Doing it in the Lateral Axis
modfly's Avatar
USA, OH, Akron
Joined Dec 2006
15,365 Posts
So to do this mod...first unplug the motor from the brick. You might want to memorize its orientation as it plugs in 2 different ways. Then the first step is to do the Stick programming toggle to ch2\ch6.

hint... For Stick programming to work, the TX channels must be at full deflection with 100% rates set. When the mode is toggled you will see this indication..
AR6400 mode change (0 min 12 sec)
modfly is offline Find More Posts by modfly
Last edited by modfly; Feb 18, 2010 at 02:14 PM.
Reply With Quote