View Single Post
Old Feb 09, 2010, 08:08 AM
JOLOVINS is offline
Find More Posts by JOLOVINS
Registered User
Joined Sep 2004
836 Posts
The switches are on boards, 3 on each board left and right on the radio. You cannot switch the boards from left to right(I did a left hand conversion), but you can move switches. Remove the back AND top of the radio, take the board out, and de solder the switch off the board. I used de solder braid from radio shack and a fairly hot iron. Im not an electrical guy but it wasent to bad.

John L.
JOLOVINS is offline Find More Posts by JOLOVINS
Reply With Quote