Thread: Discussion Hitec Aurora 9 Transmitter
View Single Post
Old Feb 04, 2010, 12:39 PM
MikeMayberry is offline
Find More Posts by MikeMayberry
Hitec/Multiplex USA
MikeMayberry's Avatar
Poway, California, United States
Joined Sep 2000
4,212 Posts
Quote:
Originally Posted by tom6696950 View Post
asking again Mike
The latest version is V1.06. When you plug in the Aurora w/HPP-22 to the PC and launch the software you will be prompted to update to the latest version.

Here's most of the updates.


1.Speed Function Modified in Flight Condition
a. While using Speed function in Flight Condition, the movement has been modified between all flight condition’s speed to 10.0
b. While using Speed function in flight condition, the movement has been modified when one of the condition’s speed set up at 0

2. In Heli mode's "Swash to Throttle Mix" and "Rudder to Throttle Mix", when throttle is set to "High", it performs over Throttle curve's 100% limit. → Fixed.

3. D.Trim's moves opposite direction when ELEV2 Channel selected separately. → Fixed.

4. D.Trim movement changed in T.Curve (except Normal ) Condition → Trim Link default value changed from ACT to INH in Flight Condition.

5. Setting limit has been adjusted from +/- 100 to +/- 125 in Butter Fly function.

6.Touch Lock. Setting value : Always off, 5sec, 10sec, 20sec, 1min


Mike.
MikeMayberry is offline Find More Posts by MikeMayberry
Reply With Quote