View Single Post
Old Jan 19, 2010, 09:04 AM
MattinAZ is offline
Find More Posts by MattinAZ
Registered User
MattinAZ's Avatar
United States, AZ, Gilbert
Joined Jan 2005
1,994 Posts
Did you order it with the Fan?

If so the Prodesign 90mm fan has a molded in cut-out for the install of the outrunner motors. No mods to the fan needed - Nice touch.

I have tested the Scorpion in this fan on 6S I get 1550 watts at 50 something amps and the motor is nice and cool. I plan on testing it on 7S tonight and getting temps and numbers.

Also have the Het motor and I believe you can run 7S on that one with heat sink installed. Yet to test it

Will post them on my F-18 thread.

Matt



Quote:
Originally Posted by bri6672 View Post
Hey Guys,

So I am a bit lost on what motor I should match up with my Midi Fan.

So I am getting ready to build my Pro Design F-18 and I have been reserching setups for weeks now looking for that balance of decent speed and power but tollerable flight times (6-7 min mixed throttle) and I am kind of stuck! Rough estimates have the jet coming out at about 7lbs with 6s and 7.5lbs with 8s. I want to keep the motor budget at a reasonable price (would like to stay under $100). I really am thinking 6s so I have the convience of charging 1 battery not 2 (2) 4s's to make up 8s) soooo Battery will most likely be 6s 5000 30c. I am going with a CC ICE 100 ESC so I can run 6 or 8s.

Neumotors are just to expensive, Medusa is out of buisness sooo I am looking at: (with some flightcalc specs on 6s 5000mah 30c)

HET Typhoon 600-37 (1700kv) 4.1lbs of thrust and 162 watts per lb (pretty weak but good flight times) $89

Great Planes Electrifly Ammo 36-56-1800kv 4.4lbs thrust and 184 watts per lb (better but not great but still good flight times) $49

The Scorpion motors (hk3026) are outrunners and needs quite a bit of Fan Modifications to make work so not sure about that but the price and specs are decent, not sure I want to hack up the fan!

Hobbyking has this:
KD36-74-09XL (1900kv) 5lbs of thrust and 220 watts per lb and still ok flight times the $31.95 price tag is just dosent seem like enough money for a motor of this size???

So can anyone make some suggestions and please dont just throw out a brand with out a model # that would work on the Midi fan.

Keep in mind if I have to I could go 8s but trying to stick with 6s

Thanks for any help,
Brian
MattinAZ is offline Find More Posts by MattinAZ
Last edited by MattinAZ; Jan 19, 2010 at 09:12 AM.
Reply With Quote