View Single Post
Old Jan 12, 2010, 12:33 AM
pghern is offline
Find More Posts by pghern
An Aussie in Dubai
United Arab Emirates, Dubai
Joined Jan 2009
287 Posts
Originally Posted by David Gower View Post
I give up ... Told 'ja I was PC deprived.
No joy with either or Desk Pilot or FMS using the DX6i Tx.

Dunno what I'm doing wrong, and any assistance would be appreciated, although I still think the set up and Calibration Instructions leave a lot to be desired ... in both programs for a PC/electronically deprived old codger like me.

Not a happy camper!

Hi Daffy,
First up.... did you go into Windows control Panel and confirm that the Rx is being recognized?
It should show as a "PPM" controller.
BTW - you go to "Game Controllers".
If you are not seeing "PPM" when you are all connected then you won't be flying. Probably the USB dongle
If Ok there, then start up DeskPilot go to Menu , Controls, and see if you are getting any movement of the dial when you move the sticks?
If yes, then select the correct channel for the relative movement you see.
If no, then I am


BTW - did you set up and save a new model on the DX6i for "SIM"??? If not then the TX could be looking to 'pair" to the Rx and won't transmit.
pghern is offline Find More Posts by pghern
Reply With Quote