Airtronics SD-10G tx good for DLGs ?
View Single Post
Nov 24, 2009
, 10:09 PM
or F, J, K, or even TD
Joined Jun 2007
2.4 antenna plumbing...
Here you go. Some pics of my 2.4 install. This is my Airtronics 2.4 install for my Concept DLG.
Only a slight hassle attaching the wing to fly. The antennas slide into the teflon tubes very easily.
Hope this helps.
View all Images in thread
Here is the top side with the two teflon tubes sticking out on either side of the front alignment pin.
2.4 coax antennas sticking out through their individual exit holes
Looks like this when stored with wing off
fuse only with antennas showing
again fuse and antennas
view of leading edge with teflon tubes, and front pin
back lighted shot. you can see the antenna tubes to the left of the left rds rod, and to the right of the right one. the 1.25 inch antenna ends are ultimately positioned just in front of the hinge line.