View Single Post
Old Oct 18, 2009, 04:41 AM   #264
Ronnie - Sheffield UK (G0NJD)
 
mallettron's Avatar
 
Join Date: May 2007
Location: Sheffield, S. Yorks, UK
Posts: 169
Today will be first flight with the keychain camera, I will try and post video later

Here is my setup

EasyStar, Brushless (2200kv) with stock prop, Pentax Optio S5n (5MP) mounted sideways, slightly forwards and slightly down, I-gotU GPS logger, Chewing Gum camera mounted forwards and slightly down and the Keychain under the wing for downwards video (note the velcro on the wing for backwards and sideways video or the other camera when it arrives) Ive put a rubber band shockie on the camera so if it comes off I shouldnt loose it)


Ronnie
Attached Thumbnails
  • Name: IMGP0001.jpg
Views: 171
Size: 56.7 KB
Description: My camera plane, the Pentax can be replaced with a Tevion/Jazz HD camcorder if needed

Total weight 900g (29oz) My camera plane, the Pentax can be replaced with a Tevion/Jazz HD camcorder if needed Total weight 900g (29oz) 56.7 KB · Views: 171

  • Name: IMGP0004.jpg
Views: 171
Size: 33.3 KB
Description: Keychain camera pointing down, held on with velcro with rubber band shock cord in case it comes loose in flight or when landing. The red strip of velcro on the top side of the wing is alternatve position for this camera or the other camera when it arrives Keychain camera pointing down, held on with velcro with rubber band shock cord in case it comes loose in flight or when landing. The red strip of velcro on the top side of the wing is alternatve position for this camera or the other camera when it arrives 33.3 KB · Views: 171

  • Name: IMGP0002.jpg
Views: 150
Size: 45.0 KB
Description: Pentax Optio S5n 5MP stills camera using DIY IR switch (search for 2$ Pentax IR switch in the groups). The Chewing Gum camera is just slotted in the front of the fuz, the hole is slightly smallet than the camera so its held in by friction Pentax Optio S5n 5MP stills camera using DIY IR switch (search for 2$ Pentax IR switch in the groups). The Chewing Gum camera is just slotted in the front of the fuz, the hole is slightly smallet than the camera so its held in by friction 45.0 KB · Views: 150

  • Name: IMGP0003.jpg
Views: 118
Size: 50.1 KB
Description: GPS logger for the Pentax, assuming the time is right on the camera, this logs position every 1sec and I can then match up points on the flight with the picture taken GPS logger for the Pentax, assuming the time is right on the camera, this logs position every 1sec and I can then match up points on the flight with the picture taken 50.1 KB · Views: 118


Last edited by mallettron; Oct 18, 2009 at 04:55 AM.
mallettron is offline Find More Posts by mallettron   Reply With Quote