View Single Post
Old Sep 27, 2003, 04:58 AM
tocano is offline
Find More Posts by tocano
Registered User
tocano's Avatar
Perth, Australia
Joined Sep 2003
680 Posts
What to do to fix my HB problems now?

I finally got a GY240 and a new tail motor edp100 (actually was going for edp50). The tail still can't keep up. So I tried a direct drive with a small orange colour propeller. But still doesn't lock the tail well. So far HB been nothing but problems for me. Over $500 dollar for 2 HBs and parts still can't hover properly. I also have the collar and swashball mod.

I must be the slowest leaner here. Though I managed to hover my Corona the whole batter pack on the second flight. No comparison so far.

Also today I installed 2 escs and removed the stock mixer. The escs are both 20 A and very light.

I don't ig the extra weight creates this effect, the cyclic response is very slow, too slow to fix roll/yaw to return to hovering state.

Am I expecting too much from my HH gyro and the tail motor. I think I'll try a bigger tail prop next week. Currently it's 3x2.
tocano is offline Find More Posts by tocano
Last edited by tocano; Sep 27, 2003 at 07:00 AM.
Reply With Quote