View Single Post
Old Oct 09, 2009, 11:13 AM
Hal_The_Hacker is offline
Find More Posts by Hal_The_Hacker
I Can Fly An FP Inverted!
Hal_The_Hacker's Avatar
Teddington, Middlesex, UK
Joined Jun 2008
1,536 Posts
Quote:
Originally Posted by deanc338
My GT arrived yesterday and so far my parts audit seems complete and no missing what ever. I think....

The only thing I noticed is that there is a hole on the tail boom that is supposed to prevent the tail assembly from turning and there is nothing on the kit that will go there. I checked the Trex250 manual and it has a part that goes there that does that and the tail assembly looks different where it grips the boom. We'll check with HK support for answers, if none then a screw would be used.

Oh, the canopy is about 18grams, which I think is on the heavy side and the towerpro sg90 is a tight fit.

So far I'm happy, but wait until I dismantle the head to check deeper and put some thread lock.
make sure to check the blade grip bearings, mine came with the wrong ones
Hal_The_Hacker is offline Find More Posts by Hal_The_Hacker
Reply With Quote