3D HobbyShop 57" Extra 330SC
View Single Post
Sep 13, 2009
, 06:30 PM
Fly Low or you'll never know!
Joined Jul 2002
Here's my 57'' 330SC
Picked mine up friday from Plane Fun RC.
Very nice looking plane. Gonna match my 103'' SC.
The build was quick and finally got the model done.
I'm gonna go to the school yard in a little bit and do the maiden.
Tons of throw on the ailerons. I'm gonna do max on the elev and 50 degrees on the ailerons.
Torque 4014/570 motor
Castle Creation 80 amp speedo
Xoar 15x8 prop
Spektrum rec AR7000
5s Hyperion 35c 3300mah packs
Sealed all hinge gaps except the rudder
AUW is 5 lbs. ( same as my old 55'' SHP )
View all Images in thread
New out of the box
Torque 4014/570 motor - 1/4'' spacer between motor and firewall, Castle 80 amp speedo,
6 vot bec mounted in bottom to balsa plate I glued in
receiver mounted to balsa plate I glued to rudder tray then to balsa plate glued down in the bottom
satellite receiver mounted on left side
view of the elevator servo wire
nice touch with the carbon fiber tube to strengthen the elevator rod. I soldered a brass coupler to the rod then added Dubro 2-56 ball links.
aileron rod I did the same. I soldered a brass coupler to the rod then added an extra ball link
Nice filler plate for the landing gear plate
Kavan wheels added
Last edited by RC4x4; Sep 14, 2009 at