View Single Post
Old Sep 02, 2009, 04:10 AM
Threshold is offline
Find More Posts by Threshold
Registered User
Threshold's Avatar
London UK
Joined Jul 2004
2,532 Posts
Can someone let us know what length servo extensions we will need?

I always do the pull/pull by fixing the servo end first then do the rudder end, I find it easier to work outside the fuselage and you can crimp the tube in place. I also use fishing crimp tubes, they are two tubes welded together and I crimp about 4 vertical crimps along the tube with side cutters.

I have just received my Pacer Hinge Glue. Its a vinyl acetate polymer emulsion, can I use it for the control horns as well? or stick to epoxy?

One really silly problem I always have is deciding which bays to cut out under the fuselage for the cooling air exit. The pix are always so close up you can't see which bays to cut out. Stupid problem I know but I like to follow the instructions as close as possible and feel perhaps there is an optimum position for the cut outs?
Threshold is offline Find More Posts by Threshold
Last edited by Threshold; Sep 02, 2009 at 06:40 AM.
Reply With Quote