Originally Posted by RocketJoe
the fact that it puts interferance on the video when it talks is watt makes me believe that somethings a miss??
I miss that yesterday. That a common problem when the mic volume is too high, it saturated the channel audio and it affect also the video. You need to lower the mic volume by adding one resistor in the audio wire or in the power wire of the mic. Don't ask me which value, I start with a big value and use samller value until the sound appear good. The value vary from one mic to the other, and it will not work all the time.
This is what I explain in my previous post, perhaps an attenuator at the mic input of the osd that we would adjust the value in the on screen menu. Presently the mic input have an amplifier I think.