Thread: Discussion Another new 2.4GHz system!
View Single Post
Old Aug 09, 2009, 11:47 PM
ronaldf is offline
Find More Posts by ronaldf
Registered User
ronaldf's Avatar
Oakhurst, CA
Joined May 2006
355 Posts
Originally Posted by wjbite
The smaller one is for binding directly if you have good access to your Rx.
The larger one is to use if you have a three wire charging port that will accept that binding plug - might keep you from having to remove the Rx from your plane.
If the radio that you have is the 4 channel version here is a place for more info. - but since you seem to have a manual, it must be the 6 or 9 channel version - then this link is of no use to you.
However, you may have the 6 channel Rx that is sent with the 4 ch. Tx - then you could get some info for the Rx - just ignore the Tx info.
Originally Posted by rkkennard
It's the binding plug, used so that the transmitter and "see" and bind to the receiver the first time.
Thank you for the information. I have a Turborix 6ch radio and several RXs that I plan to use in several helis. I am new to this 2.4 gear. The manual I have is not the best.
ronaldf is offline Find More Posts by ronaldf
Reply With Quote