Originally Posted by pghern
Hello All, Great thread,
I have just go my Clouds Fly from Singapore along with Spectrum DX6i.
This is my first plane but hopefully not my last therefore I chose a good Tx.
My question is can I put the ESC directly under the battery or will it get too hot.
I have got a 2200mha battery, cut out a little and have a snug fit.
There is still room for the ESC under the battery.
Also any issue with the 2.4ghz Rx being close to the battery and and power wires?
I wouldnt recomend putting the esc under the batt cause they both will get hot. I put the esc behind the servos in the fuselage it will help balance it with the 2200 batt also put the receiver there also. I too use a dx6i and i use the y connectors but to each his own i like the extra channel available to add stuff.