Thread: Discussion 40" Dynamic Build Thread
View Single Post
Old Jul 05, 2009, 12:38 AM
joe manor is offline
Find More Posts by joe manor
Stay in it!!!!
Riverside, California, United States
Joined Aug 2004
5,061 Posts
Now I take a piece of endgrain balsa and slide it under the servo and just CA everything in place. I use the gorilla glue for this. I also glue the base of the servo to the fuse side really well. Quick and easy. Once the servo is glued in I take the gorilla glue and glue the end of the pushrod housing to the side of the fuse not forcing it to the fuse side but filling any gap that exists. I let the housing stay where it is. Once the end of the housing is glued, I take regular thick CA and run it back down the housing into the boom glueing it down. Be sure to plug off the antenna exit hole or it could get messy.
joe manor is offline Find More Posts by joe manor
Reply With Quote