View Single Post
Old Jun 18, 2009, 02:39 PM
timocharis is offline
Find More Posts by timocharis
Dave North
timocharis's Avatar
USA, CA, San Jose
Joined Apr 2004
5,254 Posts
Quote:
Originally Posted by solomonx
What would be the best wind to turn a GWS 9x4.7 on a 2S 350 or 2s 480 pack? Most of the winds I have seen are for 3S. I know the 1500Kv stock will turn it enough for a 5-6oz 3D foamy on those packs, but I would like to rewind it for the best efficiency.
Probably a 13-turn wye on dLRK or a 12-turn ABC. The 13-turn ABC was a little soft on the 9050. I'd probably go ABC on that quest due to the naturally lower Kv and resultant higher torque.
Quote:
I am used to winding my own Customcdr motors, but since they are no more, I figure the rewound HC motors are the next best alternative.
In my testing, these are not the next best alternative. They're better than the ccdr.


Dave
timocharis is offline Find More Posts by timocharis
Reply With Quote