View Single Post
Old Mar 31, 2009, 08:40 PM
Fluke63 is offline
Find More Posts by Fluke63
Registered User
Joined May 2005
131 Posts
Quit while I'm ahead??

Fellas,
I just yanked the 3 power supplies from a Dell Power Edge 4300 server that we were scrapping at work. I pulled the wiring harnesses from the supply to the boards so I had the colored wires. I got it to come on by connecting only two gray wires and I had 12.08 volts on the yellow wires. I connected my Triton with a big Pb gel cell and 3 lipos on my Polycharge 4 and cranked them all up each at about 1000mah. The PS only dropped to 12.04 volts. Is there any reason to go any further? Am I done? I tried loading the 5 volt line with a resistor and the voltage actually dropped. So is there anything left to do or just use it and be happy? The PS says 16amps @ 12 volts which is plenty for me. But I thought I would offer to sell the other 2 to some guys in my local club. I already had 2 converted PC PS, one 8 amps, one 2 amps. Let me know, Thanks,
Fluke63 is offline Find More Posts by Fluke63
Reply With Quote