View Single Post
Old Jan 27, 2009, 02:00 AM
Doffen24 is offline
Find More Posts by Doffen24
Registered User
Doffen24's Avatar
Norway
Joined Sep 2008
247 Posts
Power problem

Hi Westereng.
If it goes orange, it tells you that in a splitt second (25 ms) or longer- you have had a voltage drop below 4,4 V. You Voltage meter does probably not react that quick, it only measures average voltage. Sudden changes can only be measured with an oscilloscop.

Did you move any servoes when the green light changed? Like any other el. engines, servoes will pull a bigger load (amps) when starting to move.

I used the Graupner metode, by conectiing a capasitor (4700uF) to take the dip, but my battery is big enough (can deliver enough amps). What is the status on your battery and how much load is it pulling.



Best regards JE






Quote:
Originally Posted by westereng
I have exactly the same story. I have mesured the Volt by the BEC to 4,9 Volt and the receiver is green for a few seconds, thereafter red.
Can I use the system when the light is red ?
Doffen24 is offline Find More Posts by Doffen24
Last edited by Doffen24; Jan 27, 2009 at 02:21 AM.
Reply With Quote