Thread: Discussion Another new 2.4GHz system!
View Single Post
Old Jan 26, 2009, 07:37 PM
freechip is online now
Find More Posts by freechip
Air, Ground & Water
freechip's Avatar
Canada, ON, Rockland
Joined Aug 2008
26,839 Posts
Had a question about range check\test. I have read that the binding procedure is similar to the spektrum. (bind plug in batt port - power up RX - bind button on TX & power up TX) now with this said I have also read that for range check, some are simply pressing the bind/range button and checking on the ground and air and someone even posted that after 500 meters they still had control. Now if the binding process is similar to Spektrum, wouldn't the range check be similar and that something else has to be done (spektrum= hold trainer switch & toggle dual rate switch 4 times) and range test at 30 yards or 90 feet. Holding down the bind/range button and still having control after 500 meters sound like this would not be the right procedure for range test. I know that at 25$ I could just buy it and test the regular range on the ground, but was just curious if the real instructions were available or if any of the more experience people here had the RANGE THING figured out.
freechip is online now Find More Posts by freechip
Reply With Quote