Thread: Build Log Bluecor Wing Build Thread
View Single Post
Old Dec 11, 2008, 09:49 AM
cjbucher is offline
Find More Posts by cjbucher
Registered User
cjbucher's Avatar
Raleigh, NC
Joined Sep 2004
2,757 Posts
Quote:
Originally Posted by more_eggs
thanks heaps guys..
hmm im a little worried about too high an amp draw as the battery is a standard pack out of a honey bee king 2..so its only rated for 10c at 1000mah...could it cope with the 4.75x4.75?
ill probably have to pick up another pack anyway so wat sort of mah and discharge rate are we talking?any suggestions on a cheap source?
sorry for all the q's..bit of a nub wen it comes to lipo tech etc..
cheers,
matt
10c 1000mah really can only handle 10 amps. You might get away with the 4.75x4.75 but try not going full throttle too often. In any case, that battery will age fast.


Quote:
Originally Posted by more_eggs
one other thing...take a sheet of paper for example...hold it out flat and it will bend and flop down...do the same thing again but this time put a curve or "arc" in it wen u hold it...much more rigid and it doesnt flop..i think this applies to the wings that use 2 sheets with a spur as they have the same curve built in the design hence making it much more rigid...

matt
Um, that's what I said.
cjbucher is offline Find More Posts by cjbucher
Last edited by cjbucher; Dec 11, 2008 at 09:54 AM.
Reply With Quote