Thread: Build Log Wicked powered SR-71
View Single Post
Old Dec 01, 2008, 10:34 PM
The Don is online now
Find More Posts by The Don
Wonderfully Wicked
The Don's Avatar
Willoughby, Ohio
Joined Jan 2002
13,622 Posts
Quote:
Originally Posted by sanman55
Are you going to use 2 channels for the motors or put the speed controls on one channel?
How many servos will the esc. handle? I did not see any info on my 40a speed control paperwork on this.
Will you use a seperate bec.?
On some esc. you have to disconnect the red wire on one, and others you do not have to do this. What does your esc. recommend.
Got to have this bird.
Happy belated thanksgiving to all.
Sanford
I am going to run them on a Y harness on one channel. The ESCs have 3 amp switching ESCs, and the ESC manual says they are good for 5 servos. It is listed at the bottom of page one on the ESC manual.
http://donsrc.com/ESC_Manual.pdf

I will disable the red wire on one ESC before putting themonteh Y hrness.

Don
The Don is online now Find More Posts by The Don
RCG Plus Member