Thread: Discussion Firefox Ep100/ep200
View Single Post
Old Nov 25, 2008, 11:26 PM
Ampdraw is offline
Find More Posts by Ampdraw
Registered User
Australia...we live inverted.
Joined May 2008
5,409 Posts
Quote:
Originally Posted by tonyastro
I'm new to cp helis. So if I get the FF100 kit+motor+esc what else do I need to fly this (besides tx)?
Rx
Servos x 4 (20.5mm long or less x 8.3mm wide or less x height is not so specific)
For that motor: 3s 650-900mah lipo (not more than 31mm wide) 15C or higher. Approx 42-48g with wires.
Little gyro head hold sub 10g is good.
Battery connecter for the esc. Jst or micro Deans
6x bullet connecters for the motor to the esc (2mm or 3 mm)
2.3mm id 0.4 mod pinion (12T I think for 3s)

Amp
Ampdraw is offline Find More Posts by Ampdraw
Last edited by Ampdraw; Nov 25, 2008 at 11:38 PM.
Reply With Quote