View Single Post
Old Oct 22, 2008, 12:48 PM
ipsmotors is offline
Find More Posts by ipsmotors
3DHS Junkie
United States, CA, Fullerton
Joined Nov 2007
2,098 Posts
New Product
3D Hobby Shop 47" Edge 540 #BUILD VIDEOS ADDED#

Lookie what I see.

http://www.3dhobbyshop.com/detail.aspx?ID=2409

http://www.3dhobbyshop.com/detail.aspx?ID=2408

From the 3D Hobby Shop website:

This 47" Edge 540, developed by Scott Stoops, is a fantastic performer. Light KE coupling, no wing rock, excellent pitch authority, great all-around flight performance....all in a durable lightweight package. The Edge is really, really easy to assemble, too. The wings are easily removable, and ride on a strong carbon-tube wing spar. The landing gear is one-piece, molded carbon-fiber and mounts to a strong, composite-reinforced plate. The motor box is pre-assembled and pre-drilled and nutted for many popular 28-30mm outrunners. The tail feathers are fully-airfoiled for highest performance.

The Edge includes ball-link/phenolic control hardware, and is covered in genuine Oracover (Ultracote) covering. The green version is done in beautiful pearl metallic green. The red version is beautiful true red, just like the full-scale RedBull air racer.

Specs:

Wingspan - 47"

Wing Area - 450 sq. inches

Weight - 37-41 oz. depending on setup, lipoly pack

Spinner - 40-42mm or 1.75"

Use Hitec HS-65HB or HS-65MG servos. Long servo arms are required for full 3D throw.

The Edge 47" requires a brushless outrunner motor 108-148 grams weight. Good choices include: Torque 2818T-900 or Hacker A30-16M for lightweight setups with 3S 2100-2500mah lipoly packs. For more power, use a Reaper GR-35 on 3S or 4S, or a Torque 2814T-820 on 4S 2200.

Build videos:

3D Hobby Shop 47" Edge 540 build movie #1 (4 min 54 sec)

3D Hobby Shop 47" Edge 540 build video #2 (5 min 11 sec)

3D Hobby Shop 47" Edge 540 build video #3 (6 min 11 sec)

3D Hobby Shop 47" Edge 540 build video #4 (5 min 35 sec)
ipsmotors is offline Find More Posts by ipsmotors
Last edited by ipsmotors; Nov 10, 2008 at 09:04 AM.
Reply With Quote