View Single Post
Old Sep 14, 2008, 07:36 PM
maguro is offline
Find More Posts by maguro
Registered User
maguro's Avatar
United States, DE, Bear
Joined Apr 2007
2,755 Posts
Here are some photos of my BBAP1. It still needs graphics.

The AUW including camera and battery is 47oz (1320g). The motor produces 33 oz thrust at 266 watts and 22 A on a 10x4.7 prop and a 2200Mah 3S lipo. That is a bit too much current for this motor. It should not be run at more than 19A, so full power is a no no with a fresh battery. After about 30 sec, full power is OK. I maidened the BBAP1 on a 1600 Mah battery that maxed out at 19A and 245W. With either battery the power worked out to about 90 watts/pound which is not bad.
maguro is offline Find More Posts by maguro
Reply With Quote