View Single Post
Old Sep 09, 2008, 02:30 AM
thomasscherrer is offline
Find More Posts by thomasscherrer
Registered User
thomasscherrer's Avatar
Danmark, Hovedstaden, Ballerup
Joined May 2007
3,260 Posts
Hi Erwin, we had actually a megabit eeprom glued onto the first receivers,
after flight we could see rssi levels and errors and failsafes and antenna switch selections,
all that code have been removed after we have verified the receivers functions.
I dont want to add the code again, due to timing and all sorts of bad things that can happen, also the receiver core code is now tested and verified to perform good and stable, fooling arround with it, might add unlucky things.

I have an idea: take the UHF system and find out the range without antenna on the tx,
make a few tests on your field or garden, be sure the results are almost the same,
take an rx one servo and a 4 x nimh pack in your hand, and check if you have the SAME range just near that antenna tower you are affraight of,
then you know if they send out bad carma waves :-)
thomasscherrer is offline Find More Posts by thomasscherrer
Reply With Quote